hwc_logo_qtr.jpg (21587 bytes)

Power_Steering_Pump_Brackets.jpg (16512 bytes)

"PS001" - Big Block Saginaw Power Steering Pump Brackets - $55 per Set

For use on 1969 and later Big Block engines without Air Conditioning.  Will fit both styles of Saginaw pumps.  Includes the correct OE style fasteners to mount the pump to the brackets and the assembly to the water pump housing.  Extra washer provided for use on water pump housing bolt in adjusting slot.   POWDER COATED black for better appearance and longer life.

Click here to view Saginaw pumps and installed PS001 brackets.

"PS003" - Big Block & Hemi TRW Power Steering Pump Brackets - $65 per Set

For use on most pre-1969 Big Block engines without Air Conditioning.  Also used on 1966 426 hemi applications.  To correctly use these brackets, the TRW pump must have a pump reservoir body to rear pulley face distance of 1 3/4".  Includes (3) 5/16-18 hex coni sems fasteners for mounting the pump to the brackets and the bolt to mount the assembly to the water pump housing.  The washer is provided for use on water pump housing bolt in adjusting slot.  POWDER COATED black for better appearance and longer life.

Will not work on Federal power steering pumps.  See photo below for pump differences.

Click here to view TRW pump and installed PS003 brackets.

Use belt number 15395 when using 4 7/8" diameter pulley and 15410 with the 5 1/2" diameter pulley.

"PS004" - Small Block Saginaw Power Steering Pump Brackets - $75 per Set

For use on 1970 and later Small Block engines.  Will fit both styles of Saginaw pumps.  Can be used on both A/C and non-A/C applications.   Includes the correct OE style fasteners to mount the pump to brackets and the bolt, conical washer, and spacer used to sandwich the brackets to the pump body.  Extra washer provided for use on water pump housing bolt in adjusting slot.  POWDER COATED black for better appearance and longer life.

Click here to view installed PS004 brackets.

"PS005" - Big Block & Hemi Federal Power Steering Pump Bracket - $75 each

For use on 1967-72 Big Block & Hemi engines.  Can be used on both A/C and non-A/C applications.  Includes (3) OE correct 5/16-18 place bolts to attach the bracket to the pump and the bolt to mount the assembly to the water pump housing.  The washer is provided for use on water pump housing bolt in adjusting slot.  POWDER COATED low gloss black for better appearance and longer life.

Will NOT fit TRW/Thompson pumps.  See photo below for pump differences.

Click here to view installed PS005 bracket.

"PS006" - Small Block Federal Power Steering Pump Brackets - $75 per Set

For use on 1970-72 Small Block engines with aluminum water pump.  Can be used on both A/C and non-A/C applications.   Includes (3) OE correct 5/16-18 place bolts to attach the brackets to the pump and the bolt, conical washer, and spacer used to sandwich the brackets to the pump body.  Extra washer provided for use on water pump housing bolt in adjusting slot.  POWDER COATED low gloss black for better appearance and longer life.

Will NOT fit TRW/Thompson pumps.  See photo below for pump differences.

Click here to view installed PS006 bracket.

"PS007" - Small Block TRW/Thompson Power Steering Pump Brackets - $55 per Set

For use on 1964-69 Small Block LA engines with cast iron water pump housings and TRW or Thompson pumps.  Can be used on both A/C and non-A/C applications.   Includes (3) 5/16-18 hex coni sems bolts to attach the brackets to the pump body and the "H" head bolt, conical washer, and nut used to mount the brackets to the water pump housing.  Extra washer provided for use on water pump housing bolt in adjusting slot.  POWDER COATED low gloss black for better appearance and longer life.

Will NOT fit Federal pumps.  See photo below for pump differences.

Click here to view installed PS007 bracket.

pump_differences.jpg (18078 bytes)

Federal pump has a tapped hole in the end of the pump shaft.

TRW/Thompson pump has a hex-shaped hole or no hole in the end of the pump shaft.

Federal pump uses a reservoir cap with "ears" much like a radiator cap.

TRW/Thompson pump uses a reservoir cap that is round and may have vertical serrations but no "ears".

NOTE:  Federal pump reservoir cap will fit on a TRW/Thompson pump.

 

Home

View printable version of this page

How to purchase HWC parts