|
"349" - Deck Lid Lock Cylinder to Latch Link - $24 Each This high quality reproduction deck lid latch release link is accurately formed from correct gauge material with machined grooves at each end like originals. Two NOS zinc plated rod end clips are included to secure the rod to the lock cylinder and deck lid latch. Used on 1970-71 Barracuda and 'Cuda applications. Reference part number 2999 349.
|
 |
"371" - Deck Lid Lock Cylinder to Latch Link - $24 Each This high quality reproduction deck lid latch release link is accurately formed from correct gauge material with machined grooves at each end like originals. Two NOS zinc plated rod end clips are included to secure the rod to the lock cylinder and deck lid latch. Used on 1972-74 Barracuda and 'Cuda applications. Reference part number 3586 371.
|
 |
"778-9" - Door Lock Link Rods - $18 per Pair These door lock link rods are accurately formed from correct gauge stainless steel wire for extra strength and durability. They connect the door lock cylinder levers to the door latch assemblies and are often lost or missing. Used on 1967-72 A-Body 2-door applications. Reference part numbers 2765 778 and 2756 779. One pair required per vehicle.
|
 |
"210-1"
- Door Lock Link Rods - $18 per Pair These door lock link rods are accurately formed from correct gauge stainless steel wire for extra strength and durability. They connect the door lock cylinder levers to the door latch assemblies and are often lost or missing. Used on 1968-70 B-Body 2-door applications EXCEPT Dodge Charger. Reference part numbers 2862 210 and 2862 211. One pair required per vehicle. |
 |
"404-5" - Door Lock Link Rods - $18 per Pair These door lock link rods are accurately formed from correct gauge stainless steel wire for extra strength and durability. They connect the door lock cylinder levers to the door latch assemblies and are often lost or missing. Used on 1970-74 E-Body applications. Reference part numbers 2999 404 and 2999 405. One pair required per vehicle.
|
 |
"AX004" - 1966-1978 Interior Dome Light Lens - $9 Each An exact reproduction of the 1966-1978 interior dome light lens. Our reproduction is made from nylon for correct transparency and durability. Replace that yellowed or broken lens today!
|
 |
"RRHPC01"
- 1969-1970 Road Runner Horn Pad Center Emblem - $15 Each Correct injection molded part with proper silver border and premium Road Runner decal installed. The finishing touch for the interior of your Road Runner! |
 |
"SR004"
- Seat Rail Mounting Pad Kit - $12 per
Kit Injection molded ABS spacers with correct serrated locking washers. Each kit contains four of each. Replace your broken or deteriorated fiber spacers and rusty washers! These fit over the mounting studs on the bottom of both bucket and bench seats. One kit required for bench seats, two kits for buckets. |
 |
"T-HANDLE"
- 1971-1974 B & E-Body T-Handle Shifter - $50 Each Faithfully reproduced to be better than the original, yet exacting in every detail! Includes hard to find mounting screw and installation instructions. Used on all 1971-74 B & E-Body console shifted automatic transmission equipped cars. |
 |
"BK7074"
- 1970-1974 A/B/E-Body Bucket Seat Latch Set - $29 Set Bucket seat latch and spacer sets fit most A/B/E-Body bucket seats. Replace your worn or missing latches today to keep your seats from folding forward. Sold in sets of right and left hand latches with four spacers. Black zinc plated as original. |
|
|
"549" - 1968-1974 A-Body Parking Brake Handle - $28 Each
Replaces Chrysler part number 2823 549. Will fit earlier A-Bodies with the 9/16" shaft and roll pin configuration. Injection molded from the toughest polymer to create an almost indestructible part. Includes new roll pin. |
